粤海彩票

Home About Us Products News Service Message Job Contact Us
Three foot artificial upper unloading centrifuge
Three foot unloading centrifuge
Three foot lift bag centrifuge
Scraper discharge centrifuge
Flat top unloading closed type centrifuge
Flat type hanging bag centrifuge
Plate type small laboratory centrifuge
Artificial upper unloading closed type centrifuge
Centrifuge fittings
Horizontal screw discharging centrifuge

Add:Zhangjiagang City, more than 80 meters south of the city of peony Automobile Group
Tel:86-0512-58662585
Fax:86-0512-58660959
Contacts:Mao Zhongliang
Phone:013906246830
Email:leyujd@163.com

Flat top unloading PS1000 type...

This machine is composed of a casing, drum, chassis, inverter, brake components. When the machine is in normal operation, from the top feed tube into the material, material under the action of centrifugal force field, uniform distribution on the inner wall of the drum, liquid through the filter screen by the rotary drum filter hole and discharging solid trapped in the inner wall of the drum. When meet the separation requirements, off the motor and the parking brake, by manually cut material is discharged from the upper part of the machine.
The anticorrosion performance, especially good, ability of various concentrations of acid, alkali, salt, strong oxidizing agent, organic compounds and all other strong corrosive chemical medium. Lining plastic centrifuge, anti-corrosion centrifuge, the roller lining form, centrifugal surface attached to a layer of plastic coating, is resistant to acid, alkali, salt and other properties. But its strong operating requirements, namely: the material temperature should be at room temperature, can not be higher than 60 C.
Working principle: centrifuge at high speed (charging speed), start charging, material feeding pipe, pipe to the cloth cloth disk, get enough centrifugal force and thrown to the drum wall in the cloth wheel, under the action of centrifugal force through the filter will filter out the liquid, the liquid (mother liquor) by collecting tank chassis to a liquid discharge pipe, when the cake weight (or volume) to the machine rated loading weight (or volume), close the inlet valve, centrifuge speed to the rated speed, the material to further separation, such as material needs washing, washing valve open, washing the filter cake, and the washing liquid is filtered out, when the separation, low speed centrifuge, scraper device according to the prescribed procedures for scraping, material discharging hole through the drum from the chassis hopper fall to the receiving plate or on the conveyor belt, to complete a work cycle. Lining plastic centrifuge, anti-corrosion centrifuge, the roller lining form, centrifugal surface attached to a layer of plastic coating, resistant to acid, alkali, salt and other performance. The machine can be half lining structure, or full lining structure. In addition, the current more drum and shell by structural carbon steel lining plastic processing, can also use stainless steel form lining plastic, enables the equipment to greatly prolong the service life of the, while enhancing the corrosion resistance. Using high viscosity modified polyethylene powder, sticky relay team 8kg - 18kg, centrifuge drum per minute running 1000 - 1500 rpm without shedding phenomenon.

Technical parameters

Model

Drum

Separation factor

ω2r/g

Motor power

kw

Machine weight

kg

Dimensions

mm

Diameter

mm

Volume

L

Loading limit

kg

Speed

r/min

PS800

800

100

140

1500

1000

75

1350

1200×1200×1180

PS1000

1000

150

200

1100

675

11

2800

1500×1500×1350

PS1250

1250

250

400

900

670

15

4500

2260×1750×1350

You can call us directly
You can contact us through the following online
点击这里给我发消息 点击这里给我发消息
Add:Zhangjiagang City, more than 80 meters south of the city of peony Automobile Group
Tel:0512-58662585
Fax:0512-58660959
Copyright:Zhangjiagang Leyu Mechanical &Electrical Equipment Co.,ltd 苏ICP备12040260号-1 Technical support:Weilian